| |
|
Professional Static/LM
|
|
|
Core Package
|
 This core package includes static stress analysis with linear material models; weight, center of gravity and mass moment of inertia analysis; linear contact; FEMPRO, an easy-to-use, single user interface for finite element modeling, results evaluation and presentation; and a suite of modeling capabilities.
Typical Applications- Annealing
- Design optimization
- Impact analysis
- Infrastructure design
- Interference analysis
- Piezoelectric component design
- Press-fit
- Pressure vessel design
- Quenching
- Rotating machinery design
- Snap-fit
- Tolerance testing
- Tower design
- Underwater design optimization
- Wind load simulation
Analysis CapabilitiesModeling
- InCAD technology for direct CAD/CAE data exchange with Alibre Design, Autodesk Inventor, CoCreate OneSpace Modeling, Inovate, IronCAD, KeyCreator, Mechanical Desktop, Pro/ENGINEER, Rhinoceros, Solid Edge, SolidWorks and SpaceClaim
- Full associativity with each design change for most CAD solid modelers
- CAD support for 3-D solid models in ACIS, IGES, STEP and STL file formats
- CAD support for 2-D and 3-D wireframe geometry in CDL, DXF and IGES file formats
- Ability to create a CAD Transfer Utility installation package to provide direct data exchange even when ALGOR and the CAD package reside on separate computers
- Part names, part colors, unit of length and material properties from a CAD solid model are captured in the FEA model
- 2- and 3-D sketching tools including capabilities to draw points, lines, rectangles, arcs, circles, splines and tangent lines and modify sketch objects with commands including copy, divide, fillet, intersect, rotate, mirror, move, parallel, trim/extend and delete
- Complex surface modeling
- Capability to vary plate thickness in a single part
- Joint Creation Utility for automatically creating pin and ball joints based on either two specified endpoints or a mid-point
- Beam modeling including:
- Direct access to AISC section property data
- Ability to input beam cross-sectional properties of pipes using outer diameter and wall thickness
- Software wizard for defining tapered beams
- Bolt wizard for creating bolts and other fasteners such as screws and rivets
- Capability to combine all element types available for a given analysis type in a single model
- Capability to import FEA models that are stored in ABAQUS, ANSYS, FEMAP®*, NASTRAN, PATRAN or SDRC file formats
*FEMAP is a registered trademark of Siemens Product Lifecycle Management Software Inc. Meshing
- Capability to mesh directly from CAD data
- 2- and 3-D parametric, structured meshing options for 3-point triangular, 4-point rectangular, 8-point 3-D, between two objects and 4-object 3-D meshing
- Automatic, unstructured 2-D meshing
- Automatic, unstructured 3-D quadrilateral or triangular surface mesh generation and refinement
- Automatic, intelligent, feature-based mesh refinement and
point-and-click definition of areas where a finer mesh is desired
- Mesh seed points for specifying locations of nodes (e.g., to apply loads and constraints)
- Dimension-based mesh ordering
- A midplane mesh engine for reducing thin, solid features in a CAD model to plate/shell elements with automatic handling of parts, assemblies, multi-thickness regions and mixed element type models
- Automatic, hex-dominant hybrid solid meshing to produce higher quality elements on the first pass and more accurate results
- Mesh Study Wizard for automated mesh sensitivity studies
Element Library- Spring element
- 2-D element (planar, axisymmetric)
- 3-D truss element
- 3-D beam element
- 3-D membrane plane stress element
- 3-D plate element
- Thin composite element
- Sandwich (thick) composite element
- 3-D brick element
- 3-D tetrahedral element
- Gap element
- Cable element
- Rigid element
- Click here for a more detailed element library
Material models- Linear elastic isotropic
- Linear elastic orthotropic
- Linear temperature-dependent isotropic
- Linear temperature-dependent orthotropic
- Piezoelectric
- General piezoelectric
- General piezoelectric temperature-dependent anisotropic
- Anisotropic
- Composite laminate
Loading and Constraints- Static friction
- Forces (nodal, surface, edge, gravitational and centrifugal)
- Moments
- Cyclic symmetry (linear static stress analysis)
- Temperatures (nodal and surface)
- Voltages (nodal and surface)
- Prescribed displacements (nodal, surface and edge)
- Prescribed rotations (nodal, surface and edge)
- Pressures (surface and hydrostatic)
- Tractions
- Variable surface and distributed loads
- Remote loads (via software wizard)
- Global and off-axis constraints (nodal, surface and edge)
- Variable-stiffness off-axis constraints (nodal, surface and edge)
- End releases
- Twisting (plate elements)
- Local coordinate system support
- Lumped masses
- Mass moments of inertia
- Curing and mean temperature difference
Solver Options- Symmetric sparse
- MUMPS-based sparse
- Skyline
- Algebraic multigrid (AMG) iterative
- Banded
- Parallel processing for multiple processors
- Distributed memory processing (32- and 64-bit)
Results Evaluation- Integrated environment for model visualization and results evaluation
- 3-D dynamic viewing options and rich colors provided by OpenGL-based displays
- Result displays of:
- Displacement (contours or vectors)
- Stress
- Strain
- Strain energy density
- Damage energy density
- Reaction force
- Factor of safety
- Vector plots of principal stress directions
- Plate/shell thickness
- Isosurfaces
- User-supplied functions operating on calculated results, user-supplied constraints and material properties
- AISC (ASD 1989) code checking
- Shear and bending moment diagrams
- Precision contouring for accuracy assessment
- Support for Tsai-Wu, Maximum Stress or Maximum Strain failure criteria for composites
- Stress linearization utility for use with a linear static stress analysis on 2- or 3-D thin-walled structures
- Built-in, virtual instrumentation through Monitor for result graphs
- Full 3-D display of 2-D axisymmetric and planar model results (using rotation or thickness values)
- Fracture analysis for calculating J-integral results (strain energy release rate) and stress intensifications at cracks
- Capability to inquire on results by point-and-click or XYZ location
- Capability to display results for multiple load combinations
- Result text listing
- Support for exporting results to common Windows applications
- Annotations to highlight the location of minimum and maximum results
- Capability to define result probes at desired locations
- Dynamic clipping planes for slicing models
- Realistic visualization of elements
- Capability to display parts as transparent (translucent)
Results Presentation- Capability to save all settings for a specific presentation and view that same display at any time or use those settings with a different model
- VRML utility to generate 3-D, web-based models with results
- Export a model's visualization data to third-party HOOPS Stream File (HSF) format
- Output result contours and graphs as BMP, JPG, TIF, PNG, PCX and TGA formats
- Integrated animation creation and display tools
- Automatic image generation of each result presentation for inclusion in reports
- Report Wizard and environment for automatic generation and display as HTML, PDF, DOC or RTF formats
User Interface
- Single user interface with FEA Editor, Results and Report environments for all design and analysis needs
- Support for design scenarios (perform multiple analyses using different analysis types, load sets and constraint sets for the same model)
- Support for design studies (batch run multiple solutions with varying input and analysis types)
- Windows-native input screens, tree views, multiple views and docking toolbars
- Right-click application, modification and deletion of loads, constraints and FEA properties
- Capability to import constraints from ASCII text files
- Shortcut keyboard and mouse controls for dynamic viewing options
- Capability to use mathematical expressions for data entry
- Built-in data checking for reasonable input
- Ruler to display scale when viewing models
- Multiple undo and redo capability
- Load and constraint set capabilities for managing different loading and constraint scenarios
- Drag and drop
- Material Library Manager includes a library featuring materials from MatWeb and provides the capability to import, create and manage customized libraries
- Right-click, context-sensitive help
- Support for standard and custom unit systems
- Local zoom capability, providing an inset with a magnified view of part of the model
- Data management utility for archiving models
Automation
- API for writing to the FEM file format, using the automatic 3-D meshing tools and reading ALGOR results
- Published, centralized file format
- Built-in script and macro tools
- Support for design variable sensitivity studies and size optimization
- Add-In Manager provides ability for third-party plug-ins that offer extended software functionality
- Support for plug-and-play analysis add-ons
- Capability to define a user-defined result type
- EAGLE, a programming language designed to assist in performing repetitive tasks, conducting parametric or variational FEA studies, optimizing designs and performing FEA and MES analyses which require multiphysics
Configuration- Customization options for user control over default settings, displays, annotations, reports and much more
- Internationalized language support including:
- Graphical user interface and user documentation in Chinese (simplified), English, French, German, Italian and Spanish
- Automatic language detection based on Windows regional settings
- Convenient selection of language of user's choice
- Support for Windows (32- and 64-bit), Linux (32- and 64-bit) and HP-UX (64-bit) operating systems
- Ability to run an analysis on a remote computer
- Support for 3-D motion controllers from 3Dconnexion including SpacePilot, SpaceBall, SpaceMouse and SpaceTraveler
- Customizable mouse functionality including pre-defined and user-defined templates
- Support for LAN and WAN networked license sharing; enterprise-wide and remote-use licensing; and single, node-locked licensing
- Support for redundant servers
- Third-party partner software available for installation including Alibre Design Basic, INOVATE, IronCAD and KeyCreator
Service and Education- "What's New" dialog summarizes recent software updates
- "Getting Started" demo to guide first-time users
- Split-screen, keystroke-specific tutorials
- User's Guide with robust search and index capabilities and available in international languages
- Integrated HTML Programming with ALGOR Guide with robust search and index capabilities
- Technical support and software updates with a current Software Updates and Support subscription
- Automatic software update wizard periodically checks for new software
- Tools for managing your customer account available from the My Account section of the ALGOR web site
- Regular e-mail newsletter
Customers who bought this product also bought:
|
|
Speed: Low Medium High
Size: Full Screen
Related Information
Related Products
Related Resources
& Services
Quick Navigation
|
|
|
